1. Turn the spindle counterclockwise as far as it will go (spindle thread is fully visible),
the Ceomat is now completely closed (outlet pressure 0 bar).
Caution: Before the CO2 capsule can be inserted, the spindle must be screwed back completely as far as it will go.
Otherwise the pressure gauge will be permanently damaged by the high overpressure.
2. Now unscrew the capsule holder and insert a 16g CO2 capsule, then tighten the capsule holder onto the thread.
tightly onto the thread. After a short hiss, continue turning the capsule holder until it stops.
3. Now you can connect the connector to the desired device.
4. Turn the spindle clockwise until the desired pressure is set.
A click can be heard at the highest pressure of 1.3 bar.