Bevi Power alkaline
1.connect the Bevi to the cleaning device as described in the separate instructions.
2.Pre-rinse the line with a cleaning sponge and tap water.
3.Then dissolve the contents of the bag in 5 litres of water, making sure that it is completely dissolved.
4.pump application solution with cleaning sponge in alternating circulation for approx. 15 minutes.
5.In case of chemical cleaning, the contact time should be 15-20 minutes.
6.Rinse thoroughly with tap water. Ensure that the system is cleaning agents in the system.
Check e.g. with pH indicator paper.
Ingredients: Sodium carbonate, phosphonates, additives. 100g contain 4.0g troclosene sodium
This is a biocidal product.
Use biocidal products with care. Always read the label and product information before use.
