Description
Bevi Power alkaline is the cleaning powder for chemical-mechanical cleaning of your dispensing system with a cleaning device and sponge balls. It removes organic deposits such as hop resins, proteins and residues.
Properties
- alkaline, with active chlorine – against organic deposits
- pre-dosed: 1 sachet for 5 litres of water
- for Bevi cleaning devices (alternating rinse) and static cleaning
How to use
- Connect the cleaning device according to the manufacturer’s instructions.
- Pre-rinse the line with a cleaning sponge and clear tap water.
- Dissolve the contents of one sachet completely in 5 litres of water.
- Pump the solution through the line together with the cleaning sponge in alternating circulation for approx. 15 minutes. For static cleaning without a sponge: leave to act for 15–20 minutes.
- Rinse the system thoroughly with drinking water.
- Finally, check with pH indicator paper that the rinse water is neutral again.
Safety information
Use biocides safely. Contains active chlorine: never mix with acidic cleaners (e.g. Bevi Power acidic or Bevi Tab acidic), this releases toxic chlorine gas. When switching between alkaline and acidic cleaner, always rinse the system thoroughly with water. Causes serious eye irritation. Always read the label and product information before use. Wear protective gloves and safety goggles during use. The used solution can be discharged into the sewer with the rinse water in accordance with local regulations.
Everything for cleaning your dispensing system can be found under Cleaning.
