Description
TM Desana Max shows you how hygienic your lines are: the solution changes colour when biofilm or contamination is present. It removes deposits without chlorine or surfactants and rinses out without residue – no aftertaste in the beer.
Properties
- colour check: purple = clean, green = light, yellow = heavy contamination
- alkaline, with active oxygen – free of chlorine and surfactants
- EU-notified biocide
How to use
- Dissolve the powder in 4.5 litres of lukewarm water in the cleaning container (wear protective clothing).
- Shake the container, connect it and dispense until the solution flows from the tap.
- Leave to act for 10–20 minutes; repeat until the solution stays purple.
- Rinse thoroughly with water.
- Finally, check with pH indicator paper that the rinse water is neutral again.
Safety information
Use biocides safely. The powder is corrosive: it causes severe skin burns and eye damage. Do not breathe the dust, it may cause allergy or breathing difficulties. Do not mix with other cleaners. Always read the label and product information before use. Wear protective gloves and safety goggles during use. The used solution can be discharged into the sewer with the rinse water in accordance with local regulations.
Everything for cleaning your dispensing system can be found under Cleaning.
